Ariat boots are trendy among trail riders, cowboys, and anyone who needs to stay safe while working on the ranch. However, they’re made for hard work and long hours in the sun, so they need to be taken care of regularly. All boots need to be occasionally cleaned, but Ariat boots are especially susceptible to getting dirty because of the nature of their work. The trick is to know exactly how to clean them to look worn down and tattered.
If you wear Ariat work boots daily, keeping them clean and conditioned is a must. You want to make sure they not only look nice for your co-workers but also maintain the quality of the leather while keeping your feet safe from any harmful bacteria. In this post, we’re going to teach you how to clean Ariat work boots!
Guide to Clean Ariat Work Boots
Before you can explain how to clean Ariat boots, you must understand the material they are made from. As we mentioned earlier, these boots are made from top-quality leather, and as a result, they provide a very high level of comfort. Of course, the leather will start to show some signs of wear once your work boots get dirty, but you’re not likely to notice the apparent dirt.
There are 11 essential ways for cleaning Ariat work boots that you can follow to maintain the quality of the leather:
Way 1: Clean upper Ariat work boots
Thoroughly cleaning the upper of Ariat work boots before re-wearing them is an effective technique to clean them.
To prepare soap anmd water, rag or a brush, slightly damp cloth.
Step 1: Start with a soap and water cleaning.
Step 2: Use a brush to remove dirt and grime from the nooks and crannies.
Step 3: Next, take a black scrub brush and paint it with a boot cleaner for leather so you can remove all stains from the boot.
Step 4: Use a rag or a brush to apply the boot cleaner to the upper, and then wipe away any of the loosened dirt with a brush.
Step 5: After you have used the brush on the upper, you can use a slightly damp cloth to wipe away any dirt on the sole.
Way 2: Clean the outside of Ariat work boots
While the upper is being cleaned, take the time to clean the outside of your boots. Throw them in a tub of hot water with dish soap and scrub them down. If you have any stains that need brushing off, it’s best to take them out and do so.
Step 1: Before washing your Ariat work boots, start by scrubbing down your overalls and gloves to remove any dirt and grime.
Step 2: After your overalls and gloves are clean, take a wet rag and scrub away any dirt and grime from the work boot itself.
Step 3: Next, you want to get the outside of your work boots wet to eliminate any embedded dirt. Take a bucket of water and soak them under hot water for at least 5 minutes before drying them off with a warm towel.
Way 3: Clean the outside of Ariat work boots
Another way to clean Ariat work boots is to clean the outside regularly. It’s important to keep dirt from building up on the outside of the boot because this is where it can do the most damage.
To prepare: a soft brush or a cloth, a sponge, water or a mild soap, a polish
Step 1: Using a soft brush or a cloth, wipe the dirt from the outside of the boots.
Step 2: Next, dampen your sponge with water or mild soap and rub it along the leather.
Step 3: Now, you can add Ariat Boot Polish to the damp sponge and polish away.
Step 4: Finally, add some shoe wax for good measure to keep it protected from the elements.
Step 5: Using a clean cloth, buff the boot to a shine.
Way 4: Clean the stitching of Ariat work boots
The next step to cleaning your Ariat work boots is to clean the stitching. This will keep it looking nice and polished and help preserve the quality of the leather.
To prepare: A toothbrush, a soft cloth, a bucket of water, a bottle of water-based cleaning liquid
Step 1: Take a toothbrush and carefully clean the stitching of the boot on the inside.
Step 2: Once you’re satisfied with the stitching, you can add the cleaning liquid to your bucket of water and add some soap. If you’re using an all-purpose cleaner for leather, this is where you will use it.
Step 3: Soak a soft cloth in the cleaning solution and apply it to the stitching.
Step 4: Use a sponge with the cleaning solution and wipe down an area at a time until you have cleaned all of the stitching.
Step 5: After you have finished wiping down the stitching, you can wipe up any excess water from your boot using a towel.
Note: This procedure should only be performed on a pair of boots that have been worn multiple times and are completely dry.
Way 5: Clean Ariat work boots on the inside
Once you’ve cleaned the outside of the workboots, you need to clean the interior to eliminate germs or bacteria.
Step 1: Begin by wetting the inside of the workboots with hot water. Then, take a sponge with a boot cleaner on it to scrub away any dirt.
Step 2: Next, use a stiff brush to clean away any dirt or grime. You can also use a rag afterward to wipe away the boot cleaner.
Step 3: Once you have finished cleaning the inside of your work boots, allow them to dry completely.
Way 6: Clean Ariat work boots lining
The lining of the boots is essential to clean thoroughly because it tends to collect a lot of dirt as you’re working.
The trick is to keep the lining as clean as possible because, without good cushioning, your feet could be hurting badly by the end of a long day spent on the ranch.
Step 1: Use a brush or a cloth dampened with water, and lightly scrub any dirt between the lining and leather uppers.
Step 2: Next, dab a clean cloth with boot cleaner for leather and use it to wipe the interior of the lining.
Step 3: Once you’ve cleaned the inside of the lining, turn the boots over and use a brush to clean any dirt or grime on the outside of it.
Step 4: At this point, you should wipe the boots with a rag, mainly to remove any excess water.
Way 7: Clean sole Ariat work boots
It’s also essential to clean the sole of your Ariat work boots, as it’s easier for bacteria to grow on the bottom of your shoes. Doing it once a month can help you control odor and bacteria growth. Once again, make sure you use a pure soap and water mixture or an antibacterial cleaner if you need to.
Step 1: The sole is the bottom of the foot or the bottom of your shoe. It consists of two layers: (1) the skin and (2) a layer of fat called ‘sole.’ Cleaning it with soap and water will help control odor and grime.
Step 2: Take a wet sponge, pour some soap on it.
Step 3: Dab the soap all over the sole to clean off any dirt or debris.
In the process, you will also clean off the shoe’s leather.
Step 4: After cleaning it with a wet sponge, use a brush to remove any unsightly stains from your Ariat work boots.
Step 5: After you have cleaned your Ariat work boots’ sole, you can give it a thorough washing once a month and apply leather conditioner and any other products you deem necessary to help with care and shine.
Way 8: Clean the toe and heel of Ariat work boots
There are a few ways to clean the toe and heel of your Ariat work boots! You can either buy a specific cleaner or make one at home. Below we’ll take you through both methods so you can decide which works best for you.
Step 1: Buy a leather cleaner from the store.
Step 2: Mix a 50/50 water and white vinegar ratio if you want a DIY leather cleaner.
Step 3: Get a sponge and dip it into the mixture.
Step 4: Soak your sponge with the mixture, and then use it to scrub any stains from the toe and heel.
Step 5: Afterward, take another sponge or rag and dab at the toe and heel to soak up any excess liquid.
Step 6: Continue dabbing at the soles until all of the liquid is gone.
Use a sponge and a rag to clean your boots when you’re short on time. If you want to be more thorough, use a brush and boot cleaner for leather. Always let your boots dry completely before wearing them again.
Way 9: Condition your Ariat Work Boots
An excellent way to clean Ariat work boots is to condition the leather after you wash it. This will restore lost moisture in the leather and ensure that it stays healthy. You don’t want the leather to crack in the future, so using a good conditioner is recommended.
It would help if you always conditioned your Ariat work boots regularly for many main reasons:
- – Keep the leather healthy
- – Keep them in the excellent shape
- – Make their color sharper
- – Renew them
- – Make them waterproof and dirt-proof
- – Keep them well-moisturized
Guide to do below:
Step 1: Take a cloth and dip it in water, then apply the conditioner throughout the boot with circular motions.
Step 2: Take another cloth and gently pat the boot with it to make sure the moisture is fully absorbed.
Step 3: Let the boots dry to restore their moisture, then repeat steps 1-2.
Step 4: Once the boots are dry, take a clean cloth and buff your boots to give them a finished look.
Step 5: If you want to use an extra finishing touch, you can polish your Ariat work boots with cream or wax to make them look nice and shiny
Way 10: Polish Ariat work boots
If you take care of your work boots and clean them regularly, they may not need polishing as often as other boots. Of course, the leather will see that your boots stay looking new and not cracked and dry, but if you want to polish them, this is one of the best ways.
You will need: Lighter fluid (as to use Zippo); Brown polish (as Mink Oil); Horsehair brush (optional)
Step 1: Fill a small pot with enough lighter fluid to cover the boots.
Step 2: Heat the lighter fluid in the pot until it is warm.
Step 3: Using a horsehair brush, apply polish to the boots in circles with the grain of the leather. You do not have to brush the front and back boots equally.
Step 4: Using a rag, wipe away any excess polish from the leather.
Step 5: Let the polish dry completely, and then you can store the boots as you usually would.
Way 11: Store your Ariat Work Boots properly
- – To maintain your Ariat work boots for a long time, you should store them in a dry place.
- – If you have a lot of boots, it’s better to use a boot rack or cabinet with several shelves. By creating a separate layer for each pair of boots you have, you will be able to distinguish individual sets and keep them from getting mixed up.
- – Additionally, if you find yourself in a damp environment, it’s recommended that you cover the boots with a plastic bag so no moisture can get in and ruin your pairs.
- – Also, you should not place the boots next to the radiator or near a window that gets direct sunlight. This can cause damage and eventually lead to the deterioration of your boots.
Five Things to Avoid When Cleaning Ariat Work Boots
1. Do not need to rub Ariat work boots
You do not need to rub your Ariat work boots when cleaning them. When they need you to clean them, you do not need to rub them in the dirt. That unnecessary rubbing will damage or diminish the quality of the sole in Ariat boots because rubbing has become a habit when people try to clean their Ariat work boots. So when you are cleaning your Ariat work boots, the best thing you can do is not rub your boots. If you want to, then you should use a brush instead of rubbing. This will remove most of the dirt without harming your boots.
2. Avoid using a spray for a long time
Many people first do it when they want to clean their Ariat work boots by spraying many cleaning agents on them. This may be good for some materials but not the Ariat work boots. It can damage your leather or even destroy it, so you should avoid doing that if you want to keep your Ariat work boots for a long time.
3. Do not use harsh cleaners
If you wish to clean your Ariat work boots with a brush or any other tool with a rough surface, you should not do it. You can damage the boots or even ruin them, so be careful when using them. Also, avoid using any harsh and robust cleaner because this can make your Ariat work boots look worn out and old.
4. Avoid wiping the boots with a dry cloth
Another thing that many people do is wipe their Ariat work boots with a dry cloth. This is not good because it can rub out the color of your boots or even damage it. So, be careful of what kind of cloth you use when you want to clean your boots. If possible, use a damp cloth instead of a dry one. This will remove dirt from the surface without causing any wear and tear on them.
5. Do not try to clean the boots in a hurry
Another thing that many people do when they want to clean their Ariat work boots is to try and clean them in a hurry. This cannot be good because you may destroy your Ariat work boots by using them. Instead, try using the technique we teach in this article and then leave them for a few days or even weeks before wearing them again. You don’t want to ruin your pair of Ariat work boots that you’ve been wearing every day.
How Bad Are There If Your Ariat Work Boots Are Not Clean?
Reduce the life of your boots
The first most dangerous thing about not cleaning your Ariat work boots is that you can reduce their life. This means that if you wear your boots without cleaning, they will wear out quickly, and you will need to replace them again. This will result in you spending more money on a new pair and wasting time and energy looking for one. So, keep your boots clean, and they will serve you for a long time.
Infection of bacteria and germs
The second most dangerous thing about not cleaning your Ariat work boots is that you can get an infection from them. This means that if you do not clean your boots and wear them every day, you risk getting an infection of the skin or even worse. So, be careful of these infections and put some effort into cleaning them regularly so that they will not infect you.
Lack of protection to your feet
The third most dangerous thing about not cleaning your Ariat work boots is that they don’t protect your feet adequately. If you do not care for them and cause too much damage, they can quickly dehydrate and become very painful. This means that you will have a difficult time walking and standing or sitting down regularly. So, protection is critical when it comes to the health of your feet.
The fourth most dangerous thing about not cleaning your Ariat work boots is that you can feel less confident with them because they are dirty. This means that if you wear dirty boots, people can easily see them, and they will think that you are not clean. So, it’s essential to keep your stuff clean because if your eye is not clean, no one will think that you are a good person.
Loss of function
The fifth most dangerous thing about not cleaning your Ariat work boots is that you will lose some functionality. This means that if you do not care for them and don’t brush or clean them, you can lose the efficiency of the boots. This means that they will be tough to move in and make your feet sore if they are wet or muddy.
What is the best way to clean Ariat work boots?
There are different ways in which you can clean your Ariat work boots. For example, you can use a brush to clean them, but it’s better to use a brush with a soft surface because the damage caused by the rough surfaces will make them waste their quality. Another thing is that it is preferable when you place your Ariat work boots in the sun to dry them out well.
Are there any non-toxic cleaners for Ariat work boots?
It depends because some cleaners are powerful and can damage your boots. If you use toxic cleaners, then you can reduce the quality of your boots by a lot. So, try to avoid using any toxins as much as possible. Then, it will be okay to use natural cleaners because no harm is done to you or your boots.
What can I do if my Ariat work boots are wet?
If your Ariat work boots are wet, there is no need to worry because they can dry out quickly. Try to put them in a good place so they can dry out naturally. You can use some natural products such as onions to remove the dirt from your boots if you want. It doesn’t matter how wet they are, but the faster you clean them, the better it will be for your boots and health.
Can I wash my Ariat work boots with water?
For sure! You can wash your Ariat work boots with water by putting them in the washing machine. However, you should make sure that you dry them thoroughly before wearing them again.
Are there any chemicals that I can use to clean my Ariat work boots?
Yes, there are some chemicals that you can use to clean your Ariat work boots, but make sure you use safe ones. For example, you can try using vinegar to clean them.